| Vorheriges Thema anzeigen :: Nächstes Thema anzeigen |
| Autor |
Nachricht |
techspy Forumsmitglied
Angemeldet: 19.06.2007 Beiträge: 5
|
Verfasst am: 2008-09-17 (Mi), 16:27 Titel: Shuts down when throttle applied |
|
|
I have a stock X-UFO and have a problem with it starting. It starts up fine, the gyro spins and all lights flash as they are supposed to. When I apply throttle it shouts down, the gyro stops and it has one solid red led on. The props don't attempt to spin or anything.
Any ideas? |
|
| Nach oben |
|
 |
No.3 MX-12 Experte

Angemeldet: 14.06.2005 Beiträge: 4483 Wohnort: Buchs
|
|
| Nach oben |
|
 |
tend2it Wow That's Cool!

Angemeldet: 25.05.2005 Beiträge: 1087 Wohnort: Bay Area, Calif, USA
|
Verfasst am: 2008-09-19 (Fr), 09:56 Titel: |
|
|
Did this happen out of the blue or after a crash? ... Is it repeatable or does it only have the single red LED of death? ... check the motor and LED boards for a possible short ... as mentioned, this could cause an overcurrent at throttle up.
--Eric-- _________________ // X-UFO TUNING:
X3D-Funpilot-BL-CSM-Base-ACC-MAG, 1000/1300/1320mAh lipos, Futaba 9CHPS (2.4GHz module)
[GROUNDED]:V2 naked hybrid, 730/900mAh lipo w/no-stick holder, Plottermeier 3V piezo, elox coolies, Alu-Tweety Mod, Futaba 9CHPS (27MHz Module)
My Mods
|
|
| Nach oben |
|
 |
|